A leaking washing machine is the last thing you want to see when the cycle finishes. Thankfully, there are a few troubleshooting steps you can follow that will hopefully fix the issue and save you an expensive service technician call out!
In this article, we have compiled a list of the most common reasons for your washer leaking from the bottom and how to fix them.
If your washing machine is leaking, the first thing you should try is to determine if it is the water hose leaking. A faulty water hose is the most common culprit behind a leaky washer. On most washing machines, the water hose is located at the back of the washing machine.
Here is a list of the top causes of a leaky washer:
1. Water Hoses – Could be loose and therefore leaking in the washer or on the wall, causing a back leak.
2. Tub Cover Gasket – Could be damaged and letting water leak out on the front.
3. Drain Pump – Could be clogged with dirt or lint, causing a bottom leak.
4. Water Inlet Valve – Could be faulty, loose, or clogged, which is causing a leak from the back/bottom.
5. Door Catch – This component holds the door locked, and if it is damaged, it can let water leak out.
6. Boot Seal/Tub Seal – The transmission shaft is where the basket shaft enters the tub and if damaged can leak from the bottom.
7. Bellows or Door Boot Seal – On front loaders during fill or spin cycle—they can be damaged and cause a front water leak.
8. Water Level Switch/Pressure Switch – These switches determine the correct water level and, if damaged, can cause overfill.
Before you start troubleshooting, it is important to determine where the leak is really coming from. Remember, if your washer is leaking from the back, it may seem like it is leaking from the bottom. This is because the water will flow forward and often comes out from under the washing machine.
As this is the most common reason for your washing machine to leak, it is a good idea to start by checking it first.
You should also check these hoses for any visible damage. This could also be causing a leak.
The rubber seals on your washing machine are very durable, but over time they can become brittle and begin leaking.
If the wrong detergent is being used, it can also cause a leak.
Sometimes, the leak is not in the washing machine but is caused by the drain hose not functioning correctly.
The final thing you can check is if the washer drain pump is causing the leak.
If you are still having issues after running through the troubleshooting options listed above, it is time to call a qualified technician to come and take a look.
Microwaves are super useful appliances for busy people—you can reheat leftovers, defrost meat, and even…
The F5 E3 error code indicates that there is an issue with the lid lock…
Water dispensers on fridges have to be the height of convenience. Clean, cold, and filtered…
Have you noticed that the water in your Whirlpool refrigerator dispenser is not flowing as…
Whether your oven glass door is caked in grease after months of use or just…
Microwaves are an everyday part of most modern kitchens. They offer convenient, speedy cooking and…