The F5 E3 error code indicates that there is an issue with the lid lock on top load Whirlpool washers, or the door lock on front load washers. For top load washers, it specifically means that the lid is failing to unlock as expected.
However for front load washers, the F5 E3 error code usually means the door is failing to lock properly, often because it was not closed entirely or something is obstructing it; however, it can also occur if the door latch is damaged.
To help you resolve this error code quickly, we’ve created this handy guide that goes through the most likely causes for both front and top load Whirlpool washers, and the steps you need to take to get the lock functioning properly again.
Here are the primary causes of the F5 E3 error code on front load Whirlpool washers.
By far the most common cause of this error code on front load washers is simply that the door is not closed fully. Now, this might be because you accidentally failed to close it all the way, or because there is something caught in the door obstructing it, such as laundry items.
To fix this, follow these simple steps:
Sometimes, the error code needs to be removed manually by resetting the machine’s control board. Whirlpool recommends two things you can try to clear the error. First, try this:
If this doesn’t clear the error, perform a hard reset:
If the latch is damaged on your washer it can prevent the door from securing properly, resulting in the F5 E3 error. However, sometimes the latch is not damaged but just gets stuck due to dirt and debris, so it’s worth checking this before replacing it. You can do this by inspecting the latch, giving it a clean, and pressing it gently with your hand to free it.
If the latch appears damaged or broken in any way, it will likely need replacing. This is a job most people can do themselves, or you can call in a professional. A telltale sign of a broken latch is that the door freely slides in and out of the drum’s opening. To replace a broken latch, follow these steps:
Here’s how to troubleshoot the F5 E3 error code on top load Whirlpool washers.
Items on the lid, such as a washing basket full of laundry or a heavy box of detergent, can weigh the lid down, preventing it from being unable to unlock like usual. Remove any items that are on the washer’s lid and clear any obstructions.
Resetting or rebooting a top load Whirlpool washer can often clear the error code and enable unlocking. There are two steps to try:
If this doesn’t work, try this next step:
If after trying the steps above the lid is still not unlocked, the lid lock is likely faulty or there may be an issue with the wiring or control board. Since the lid is likely locked shut, it’s important not to force it open as this could cause permanent damage to your machine.
Due to the complexity of this issue, it’s best to call in a professional to service your machine at this point. This is because the lid will need to be manually freed before any components, such as the lid lock assembly or its wiring, can be inspected and replaced if damaged.
Water dispensers on fridges have to be the height of convenience. Clean, cold, and filtered…
Have you noticed that the water in your Whirlpool refrigerator dispenser is not flowing as…
Whether your oven glass door is caked in grease after months of use or just…
Microwaves are an everyday part of most modern kitchens. They offer convenient, speedy cooking and…
Is your washer stopping when it gets to the spin cycle? Maybe the spin cycle…
If your fridge has an ice maker, you know just how great they are! Endless…