Error code for the door and door wouldnt close. Had one time before that error that it didnt heat. Testing today heating with no issues. Installed new switch assembly since sticking switch could cause both issues. Tested again after replacing the switch assembly and all checks good and heating with no issues.; used 1 W11493414 (Switch kit) from stock

"Poor airflow to outside. Was an offset vent behind so checkers that and there was a piece of sheet metal that wasnt cut basically blocking the whole opening. Trimmed piece and then airflow much better but not 100%. Can try some loads and if dry times running long may need to get rest of vent cleaned. Gave dryer vent wizard card. Mentioned heat as well, testing good after clearing blockage. Coils didnt drop out. If customer is seeing no heat halfway through cycle may need new coils."

"Installed new timer. Customer had also been trying some timed cycles and it was taking two times. Watched cycle with new timer in and saw the coils drop out. Installed new coils, belt also cracking so installed refresh kit. All checks good.; used 1 4392065 (Repair kit), and 1 279834 (Coil kit) from stock"

"Installed new idler, belt, motor, and blower. Tested and all checks good."

Button for soap dispenser release was broken. Installed new dispenser lid and all checks good.; used 1 W10888684 ( Lid dispenser) from stock