"Found machine not leveled properly, adjusted feet. Found the center fastener not fully tightened in the rotor stator, applied loctite an tightened fastener. Tested machine, functioning with no abdominal noise."

Unit in gagrage. Ambient temp to low for unit to cycle consistently and keep freezer at zero degrees.

"Found machine with error code 4/3. Tested machine, functioning currently but customer stated that it wasnt spraying before. Replaced sump assembly with preordered part. Ran machine through diagnostics cycle, completed cycle with no problems. Closing date for the home was April 22 and the machine came with the house."

Check fridge over for issue with water dripping from ceiling. Pull ceiling cover and looked for leak but it was dry do to customer had turned off icemaker. Ran diagnostics and verify icemaker cycled and filled with out any issues and still no leak. Ran dispenser multiple times and only thing I found was a slight drip forming from filter housing connector. Reseat and test again multiple times and did not see any drips. Customer will monitor for further issues and if still a problem office should order water tank and filter housing.

RANGE WHIRLPOOL WFE320M0JW0 "Found machine with hot cooktop indicator on. Checked element, 120 going to element while off. Removed connectors and wires still had 120 going to them. Ordered control panel. Also found one burner with crack. Ordered burner. Part is not in stock, please contact customer when parts are available and return visit can be scheduled.; ordrng 1 WP8273992 (Burner) and 1 W11180282 (Control)"