"Found pin loose in motor connector causing fan to shut off after about 10 seconds abuse from vibration, reinserted pin, and tested"

Installed fan and control tested

Plastic molding around Lh side of tub creating a seal issue cleaned up plastic molding and ran unit no leaks found after if leaking persist will need to order tub

Found freezer evap fan shorting causing unit to power cycle. Removed fan from circuit and unit stays on issue is evap fan. Will need to order at whirlpool will also need control will need to schedule with customer ; ordrng 1 W11661931 (Evap fan) and 1 W11556912 (Control)

Found old bulb burned out. Installed new bulb and tried the relay. All checks good board not needed at this time.