Installed evap and drier. Pulled vac and held. Charged with 3.7oz 134a. Unit running and cooling.

WASHER WHIRLPOOL WFW5620HW2 Install fill valve and dispenser ran diagnostics all tested out good no leaks no codes..

RANGE WHIRLPOOL WFG505M0BW2 "Order board has no power down to ignitor, had it one point then never came back made sure all connections are good and tight..office to call customer for return date ; ordrng 1 W11113908 (Board)"

WASHER WHIRLPOOL WTW8200YW0 "Decline estimated need fill valve w10853723, hot water coming in slow we took hose off from wall valve and it was coming in slow there too, so customer has to get that fix before it will run properly but then customer complained that washer was keep pumping out after load is done make us think she may need board too..."

REFRIGERATOR WHIRLPOOL KRMF706ESS01 Installed new auger motor and shaft. Now dispensing ice properly