"Tested outlet, no power at outlet. Checked breakers, found one partially popped. Rest breaker and tested outlet, good. Plugged in machine and ran through diagnostics cycle, completed cycle with no issues."

"Machine has err code 9/1. Ran machine through diagnostics cycle, completed cycle but the drain pump had a slow flow rate. Checked the button trap and found a bit of debris (took quick pic). Removed debris and ran through diagnostics cycle again, much better flow when draining."

"Checked under machine and found plastic shavings all over. Found that the splutch kit was almost smooth where it meets the pulley. Tested the actuator, not fully engaging the splutch. Replaced the actuator and the splutch kit. Ran machine through diagnostics cycle, no grinding noise.; used 1 W11481722 (Actuator), and 1 W10721967 (Splutch) from stock"

"Checked for gas leak, no leaks detected. Ran machine, no abnormal smells. Customer stated that they are not used to gas drying. Explained to customer normal conditions that cause smells in gas drying, additives, home remodeling,etc."

"Installed new filter housing and turned water on. Water dispensing normally, no leaks. Installed gear on upper freezer bin. All ops good"