"Installed all parts, tested water, dispensing normally. Auger motor turning normally"

"Installed new sump/motor assembly. Tested unit, motor comin* on, no leaks. Ran diagnostic cycle, all ops good"

"Received all parts. R3moved old ice chute and found area holding auger motor completely iced in. Cannot chip it out or use a heat gun, cust will have to shut unit down and let it thaw. Cust said water dispensing very slowly, with filter in there is almost no water flow even though it is an almost new filter. Ordering filter housing; ordrng 1 Wpw10394053 (Housing, filter)"

Wash motor locked up. Ordering sump/motor assembly; ordrng 1 Wpw10605058 (Sump/motor)

"Unit needs icemaker and most likely auger motor but there are other broken parts. Ordering ice bucket, coupler, chute assembly and coupler spring; ordrng 1 W11347840 (Ice bucket) and 1 W11573761 (Chute) and 1 Wp2220458 (Coupling) and 1 W10852956 (Spring)"