Ms pic and of the receipt from Menards dated 3-15-22 for date of purchase and 3-22-22 date of delivery.Code F7-E1 displays. board connectors J5-1 to J5-4 shows 5 VDC. It should be 12 VDC. Needs an ACU control board.the control. W11567712 from DVH.Return Wednesday. 3-22-23.; schdld next appmnt for 3/22 WED !

"Ms pic.The rear gasket is fo,died over since delivery. Also infrequent squealing is heard.louder when it is full.ordering a belt, roller wheels and idler assembly, and rear felt.Return Wednesday ; ordrng 2 349241T (Roller wheels)s and 1 W10612022 (Rear felt) and 1 Wp691366 (Idler assembly) and 1 341241 (Belt)"

Replaced the separator assembly and the air gap see in the old separqtor is not present with this one.

Ms pic.There is a gap in the separator assembly and frost build up on the top of the ice dispenser chute. Needs the black separator W11423782.Leveled the right door. Return Monday 2-20-23.; ordrng 1 W11423782 (Black separator assembly)

"Ms pic.Customer is the Ellsworth community high school. Home economics room.The oven light sometimes does not go off and the oven will heat up, but not continue to heat after putting something into the oven. Door hinges are good. Removed the back panel and saw one of the yellow wires to the door light was not seated into the connection completely. I removed, crimped and reconnected it, then heated the oven to 350i. I opened the door at 325 degrees and The light operated as it should and the oven finished heating to 350.with the door closed. previously the heating went off and would not turn back on after opening the door."