"Installed new freezer door, customer stated ice maker wasnt working, it had cycled recently, rerouted wiring to ice maker and tested."

"Adjusted ignitor, oven lighting properly and ran up to temp, relighting properly. Ran for an hour and unit stopped relighting after hitting 400, suspect dsi board as unit does not click at all, ordering DSI board to replace. Quoted 50$ labor on top of whats been collected. ; ordrng 1 W10860916 (Spark board) and 1 Parttotech, used 1 SHIP100 (SHIPPING AND RETAIL DELIVERY) from stock"

"Ms pic.Tested in it and the igniter was working, the temperature averaged with in a Few degrees of 350.. showed the customer the bake igniter is slightly corroded and he wanted it replaced. There sent had the metal around the tipof the igniter on backwards. Used a truck stock goiter. Tests good.. COlliecTed the estimate of #381.68 on are auth codeLTLKH9"

Installed new control and new vent motor. Unit did drain initially but wouldnt complete the drain in test cycle. Unit did perform entire test cycle until the drain portion then sat. Sucked water out and ordered main harness and door harness. ; ordrng 1 W11568793 (Main harness) and 1 W11685311 (Inner harness)

Replaced the core charged charged board. The control settings test good. Left it at the recommended setting of 2 and the customer can adjust it after 2-4 days if they like. Collected $95.00 labor on card auth code RWKLXT