"Codes stored Load in during cleaning cycle, off balance load, overflow code, over suds, long fill code, and cannot detect temperature rise. Codes erased. In diagnostics cycled fill valves and were working correctly. When starting cycle was producing Lo flo code despite filling with large amount of water. Checked no obstructions at pressure switch hose. Continuity through harness. Customer had new pressure switch and had installed. Did not remedy code occurring. When testing did find at one point solenoid for cold was not filling seemed like was energized. Had checked harness and reseated connections. Was filling with hot in normal wash on cold fill. Did find steam was on when shut off filled normally with cold water. Currently has been filling correctly and not producing error code. Codes have been cleared would want to see if continues to work may have been loose connection. Also to see if any of the other codes saved reappear. If calling back would recommend having us order cold water solenoid for return visit. S/w1168995 79.40, ship 15.00, labor 90.00, trip 139.00. Total to replace cold water solenoid valve 331.07. FN7738780439"

Igniter open continuity power to. Replaced igniter all test good.; used 1 4391996 (Igniter) from stock

Customer getting noise in operation. All rollers and pulley look good. No defects. Screw on rightside for front panel was not all the way tight on arrival put all back together not hearing noise. Got a load of towels spun out from wash and tried with a load. Not getting noise. Possible loose screw could have been issue. Customer will monitor and get back if needed.

Installed missing screw broil bracket.

This is the South St.Paul city hall.fire department is FD of theMarie Ave and 3rd street entrance.BITH OVEN IGNITERS SHOW 3.2-3.3=amps at ignition. Calibrated the lower oven up 20 degrees and the upper oven was matching the set temperatures Within 5-10 degrees.