"Install both hinge lock unit up to cabinet with screw that was in, no brackets to hold unit just screw on floor at feet, customer complaint unit running too long I said normal for 2-3 for cycle, but i did check filter it had stuff like cherry seeds and other junk, instruct customer to clean filter often n check everything load"

"Install motor ran diagnostics and calibration everything tested out good, no leaks no codes"

"Check over unit found bad element, ran temp test to 350 and it reach, everything tested out good,; used 1 W10779716 (Element) from stock"

"Install pump, sensor pressure sw and door seal all got from Dey in vh, ran test everything tested out good no leaks no codes.."

"Wait for them to hook up washer for water test, install basket put belt and cover back ran diagnostics n calibration everything tested out good.."