"The gasket had pulled out on the lower right hand corner and the door falls down. I pushed the gasket in place, fixed the door spring and dried out the float switch. Operation tested good."

Installed new diffuser. Operation tested good.

"The screw that holds the rotor on fell off. I put some more loctite on it, and tightened it back on. Ran a quick diagnostics cycle, and everything worked."

"I adjusted the igniter so its closer to the burner. I also removed some metal pans in the warming drawer. This could cause the igniter not to function properly. I heated up the oven, and when it needed to reignite, it sounded normal."

"Installed new control, user interface and harness. Customer will monitor temps."