"Check over unit found bad link on one side but we did both since part is cheap and age of unit didnt need spring, door working fine now.."

"Install lower harness and made longer connection to pump wires bc the new harness wire to pump is still too short so its breaking right there, ran test everything tested out good.."

"Dead upon arrival light to ui is dim, so I took control apart and reset and power jump it by unplugging all connectors then plug unit back on, then installing each connection one by one ui came back up bright so Im ordering board, encoder and pca office to call customer for return date, as for unit its working now but dont know how long till we get those parts..; ordrng 1 W11627413 (Board) and 1 W11675701 (Pca) and 1 W11675700 (Encoder)"

"Part never got ordered so I called Angie to make me a stop at vh to pick up thermistor, install new part ran test with no clothing on auto and time is now counting down and shut off after cycle..; used 1 W11396709 (Thermistor) from stock"

"Check over unit found bad strike, replaced with new part, ran calibration everything tested out good, unit is under cabinet so door s not opening all the way so the switch is hitting her head per customer, so I told her it would need to be pull out and let door open freely so it wouldnt hit her head..; used 1 W11457841 (Strike) from stock"