Need Appliance Repair Service? Have a general question?
We love solving problems! Let us know how we can help by reaching out below.

How can we help?

Local Reviews
for Scandia, MN

Rated 4.5 out of 5 stars based on 2 customer reviews

Map of Scandia, MN

Dryer Repair




Very prompt and efficient. Great communication regarding service tech arrival time. Only quirk was the service tech had to borrow a ladder from us to get to the gas shut off.


Map of Scandia, MN

Great Service





Mike T.

Mike T.

WASHER MAYTAG MVWX655DW1 "Washer ....replaced control board ,,recalibrated and tested all working good now ,"

Near 228th St N, Scandia, MN 55073
Mike T.

Mike T.

WASHER WHIRLPOOL WFW8300SW0 "Washer ,,,,replaced actuator motor and cams on dispenser assl .tested all operation all working good ,; used 1 Ship (Shipping/Handling) from stock"

Near Ozark Ct N, Scandia, MN 55073
Mike T.

Mike T.

WASHER WHIRLPOOL WFW8300SW0 "Washer ....checked washer operation ..ran test cycle ,error f30 dispenser problem .found dispenser motor and cams on dispenser are sticking and not moving ,,needs cams and motor actuator ,,,pd in full .; ordrng 1 WP8540393 (CAM) and 1 WP8540394 (CAM) and 1 WP8540395 (LEVER) and 1 WPW19143586 (ACTUATOR), used 1 Ship (Shipping/Handling) from stock"

Near Ozark Ct N, Scandia, MN 55073
Mike T.

Mike T.

WASHER MAYTAG MVWX655DW1 "Washer .....checked and ran test cycle ,,,no error codes ..test cycle all working good , checked and ran cycle with with load of clothes ,washer ran through cycle good until spin cycle and lid lock clicked and unlocked ,,,lid switch went bad ,,replaced lid lock switch ,,w10838613 ...recalibrated and all working now .; used 1 W10838613 (LID LOCK) from stock"

Near 228th St N, Scandia, MN 55073
Jared F.

Jared F.

KEBC147KSS06- Kitchen-aid Wall oven-KEBC147KSS06 wall oven PF error, AFTER COOKING AND COOLING FAN HAS BEEN RUNNING A WHILE-Cust complaint unit intermittently displays of (power failure) code. Checked control for error codes, found latch error. Tested latch working normally. Pulled unit out, checked junction box. Found wire twisted in wire nut. Pulled nuts and straightened and installed nuts so wire not twisted and making solid connection. Pulled top cover and control panel. Checked harness and board. All appear normally. Checked power to control normal. Reassembled and reinstalled machine. Ran temp,up to 500 deg. Not issue found. Advised cust to call if problem persists. Would recommend replacement of control transformer and control. Control show eta of tbd with wp. If ordering please checked on avail and advise cust.

Near 218th St N, Scandia, MN 55073