Need Appliance Repair Service? Have a general question?
We love solving problems! Let us know how we can help by reaching out below.

How can we help?

Local Reviews
for Lonsdale, MN

Twin Cities Appliance Rated 4.5 out of 5 stars based on 2 customer reviews

Map of Lonsdale, MN

Rebecca




Review of Twin Cities Appliance


Map of Lonsdale, MN

Terrific service




Review of Twin Cities Appliance

Very professional and knowledgeable.


Joshua S.

Joshua S.

WASHER MAYTAG MVWB835DW4 Installed console and control. Ran through calibration and auto test. Unit is operating properly

Near Elm St NE, Lonsdale, MN 55046
Ryan W.

Ryan W.

WASHER MAYTAG MVWB835DW4 Machine had a F0e3 cleared itself then had software versions coming up across display then f5 e4 came up would not clear buttons were not always responding at times would not go into diag and would stall need to order ui and control ; ordrng 1 W11112656 (console) and 1 W11170706 (cntrl-elec)

Near Elm St NE, Lonsdale, MN 55046
Joshua S.

Joshua S.

WASHER MAYTAG MVWB765FW0 W10811956 gearcase at Brookfield wi W10754158 stator at souix falls W10754448 clutch at souix falls W10754161 rotor at W10811956. Gearcase grinding and not spinning properly gearcase leaking oil and cover rotor stator in it. Will need to get approval for repair. ; ordrng 1 W10754158 (STATOR) and 1 W10754161 (ROTOR) and 1 W10754448 (CLUTCH ) and 1 W10811956 (GEARCASE)

Near Dogwood St NE, Lonsdale, MN 55046
Joshua S.

Joshua S.

RANGE WHIRLPOOL WFG550S0HZ Sr#7727452603 checked burners for gas pressure which is about 5 water columns this is on the low side of the normal end. Customer says fire dept. said co levels are high coming out of oven sending off co detector. I ran to 425 and left door open left unit cycle 3 times and never set off co detector. To put customers at ease called techline and they are sending out combustion analyzer to check co levels. Test kit being sent to shop. Need to call and schedule with customer when it arrives. ; O-emld tckt

Near Pond View Dr SE, Lonsdale, MN 55046
Joshua S.

Joshua S.

RANGE JENN-AIR JDS1750EB0 Installed. Cooling fan and tested.

Near NE 3rd Ave, Lonsdale, MN 55046
Joshua S.

Joshua S.

WASHER MAYTAG MVWB835DW4 Customer had errors present f3e2 for valve thermistor error and f0e4 spin limited by water temp. This is due to faulty thermistor on valve installed W11165546 from truck stock cleared codes and tested. ; used 1 W11165546 (VALVE) from stock

Near Elm St NE, Lonsdale, MN 55046
Joshua S.

Joshua S.

WASHER WHIRLPOOL WFW5620HW0 Installed ACU and tested.

Near Meadow View Ln SE, Lonsdale, MN 55046
Joshua S.

Joshua S.

DRYER MAYTAG MEDX655DW1 Found blower housing packed full of lint removed and tested unit is now heating and running properly

Near NE 9th Ave, Lonsdale, MN 55046
Joshua S.

Joshua S.

DRYER WHIRLPOOL WED9600TW1 Found f1 error for control installed control and tested unit is now running and heating correctly

Near Pond View Dr SE, Lonsdale, MN 55046
Joshua S.

Joshua S.

WASHER WHIRLPOOL WFW5620HW Installed parts and tested

Near Harvest Dr SW, Lonsdale, MN 55046
Joshua S.

Joshua S.

WASHER WHIRLPOOL WFW5620HW W11319991 control at vadnais customer scheduled for Thursday ui sent was missing main power plug see pics ; ordrng 1 W11319991 (CONTROL)

Near Harvest Dr SW, Lonsdale, MN 55046
Joshua S.

Joshua S.

WASHER MAYTAG MHW6630HW0 Loose connection on main control for pressure switch causing f3e1 error inserted connector and tested.

Near 5th Ave NE, Lonsdale, MN 55046
Joshua S.

Joshua S.

WASHER MAYTAG MVWB835DW4 Found faulty pump need to order W10876600 at Souix falls customer scheduled for Tuesday ; ordrng 1 W10876600 (drain pump)

Near Halstad Ave, Lonsdale, MN 55046
Joshua S.

Joshua S.

DISHWASHER WHIRLPOOL WDT750SAHZ0 Control fault need to order W11305297 at whirlpool customer scheduled for Friday 9-2 nothing promised ; ordrng 1 W11305297 (CONTROL )

Near 4th Ave NE, Lonsdale, MN 55046
Joshua S.

Joshua S.

WASHER MAYTAG MVWB835DW4 Installed pump and tested

Near Halstad Ave, Lonsdale, MN 55046
Joshua S.

Joshua S.

DISHWASHER WHIRLPOOL WDF520PADM7 Installed harness and cord tested unit no errors passed test

Near Singing Hills Dr, Lonsdale, MN 55046
Joshua S.

Joshua S.

WASHER AMANA NTW4516FW3 Explained to customer how new machines operate that unit will not t fill all the way up. Normal operation

Near SW Delaware St, Lonsdale, MN 55046
Joshua S.

Joshua S.

DISHWASHER WHIRLPOOL WDF520PADM7 Found harness burnt and power cord burnt. Need to order WX09X70910 power cord 6.30 collected from customer. And need W11227372 harness at whirlpool. Customer scheduled for Monday ; ordrng 1 W11227372 (HARNESS) and 1 WX09X70910 (dishwasher power cor)

Near Singing Hills Dr, Lonsdale, MN 55046
Joshua S.

Joshua S.

RANGE WHIRLPOOL WFE515S0ES2 Installed control and tested unit is work8ng properly harness not needed

Near 15th Ave SE, Lonsdale, MN 55046
James R.

James R.

WASHER WHIRLPOOL WFW8620HW Found lower right shipping bolt still in place. Removed shipping bolt. Ran a test cycle. And high speed spin. All tested ok

Near Deerview Dr SE, Lonsdale, MN 55046
Nate A.

Nate A.

WASHER WHIRLPOOL LSQ9200KT0 "Lid switch was broken causing the unit to be full of water and not complete the cycle. Agitator dogs were also stripped. Installed new lid switch and agitator dogs. Ran test and all is working correctly with no further issues.; used 1 3949247V (LID SWITCH), and 1 80040 (AGITATOR DOGS) from stock"

Near SW Florida St, Lonsdale, MN 55046
Joshua S.

Joshua S.

REFRIGERATOR WHIRLPOOL WRS325SDHZ01 Leveled doors

Near Harvest Dr SW, Lonsdale, MN 55046
Nate A.

Nate A.

REFRIGERATOR WHIRLPOOL WRF535SWHV00 Installed new fill valve one unit. After installing valve cycled ice maker and all checks ok and ice maker filled with no issues or leaks. Ice bin had been moved forward since last appointment. Bin needs to be in the back of the freezer or it will hit the ice arm and tell the ice maker the bin is full.

Near Singing Hills Dr, Lonsdale, MN 55046
Ryan W.

Ryan W.

REFRIGERATOR WHIRLPOOL WRF535SWHV00 Customer complaint of water overflowing from ice maker and collecting in ice bucket arrived today and icemaker was off and bucket cleared out turned on icemaker which cycled and filled normal with no leaks but ice cubes were oversized from too much water possible valve hanging up at some point would suggest new water valve to make sure does not happen again. Customer requests office to call primary number and speak with wife to schedule a return date .; ordrng 1 WPW10420083 (valve)

Near Singing Hills Dr, Lonsdale, MN 55046
Ryan W.

Ryan W.

REFRIGERATOR WHIRLPOOL WRF535SWHV00 Customer complaint of water overflowing from ice maker and collecting in ice bucket arrived today and icemaker was off and bucket cleared out turned on icemaker which cycled and filled normal with no leaks but ice cubes were oversized from too much water possible valve hanging up at some point would suggest new water valve to make sure does not happen again. Customer requests office to call primary number and speak with wife to schedule a return date .; ordrng 1 WPW10420083 (valve)

Near Singing Hills Dr, Lonsdale, MN 55046
Nate A.

Nate A.

COOKTOP KITCHEN-AID KCES950HBL00 Took pictures to document everything. Doesn’t appear to be any damage besides the marks on the glass. Wall and bottom of micro look fine. Shut off breaker. Customer said they have always had issues with the unit regulating temperature and even on simmer it would burn things. Tested all burner on high and simmer and appear to be cycling and working. Will submit picture to safety.

Near 60th St W, Lonsdale, MN 55046
Dennis M.

Dennis M.

DISHWASHER WHIRLPOOL WDF310PAAS1 "Drain pump not secured to sump assembly, lug that holds pump on was broken, replaced drain pump, tested operations, all check ok. ; used 1 WPW10348269 (DRAIN PUMP) from stock"

Near 10th Ave NE, Lonsdale, MN 55046
Dennis M.

Dennis M.

REFRIGERATOR WHIRLPOOL WRF535SWHV00 "Water pressure is low from RO, recommended running bypass plug in fridge and removing filter. Installers did not leave plug that customer is aware of. Ordering bypass plug to customer, they can install themselves. Ice maker cycling and filling properly at this time. Advised to leave off until bypass is installed. ; ordrng 1 12664501SP (plug- bypa)"

Near Singing Hills Dr, Lonsdale, MN 55046
Ryan W.

Ryan W.

DISHWASHER WHIRLPOOL WDT750SAHV0 "Lift link not attached on,left side reattached check ok customer does not have unit mounted in place at this time or adjusted"

Near Singing Hills Dr, Lonsdale, MN 55046
James R.

James R.

WASHER WHIRLPOOL WTW5000DW1 Found lid latch broken. Installed a new lid latch. Calibrated and ran an auto test. All tested ok; pckd up 1 W11307244 (LID LATCH)

Near SW Grand Ave, Lonsdale, MN 55046