"Gasket was warped, and food was built up on the door. This wasnt letting the door seal properly. I also took the door off, I didnt see any signs of a water leak. I replaced the door seal. Ran a normal wash for awhile. I sent the bill to the customer.; used 1 W11177741 ( Door badket) from stock"

"The kick plate on the bottom of the dishwasher was loose. I tightened up the bolt, no more noise on from the door."

The ice maker tray was cracked which was causing a leak. Operation tested good after installing a new ice maker.; used 1 W10873791 (Ice maker) from stock

Install Pump from customer cant do test because dryer is down so cold water is not hooked up to the dryer cant turn on water so customer would have to check washer on first load for leak

"No codes present. Ran a diagnostic cycle, and everything worked. Showed customer how to start up the washer. I dont think he was holding the start button long enough."