Went through diagnostics on dishwasher and verify no fault codes were present. Verify heater is functioning and new sump motor is functioning properly. Instruct customer to run tap before starting wash cycle. Also showed them about cleaning filter screen and I gave them a few samples of dishwasher detergent to try. Dishwasher was functioning properly and I did not find anything else to fix at this time.

Check dishwasher over for issue with water dripping from diverter motor assembly and would need new sump assembly with seal. Replace sump and motor and run test cycle and verify all functions checked ok.; used 1 W11178672 (Sump and motor) from stock

Clean out drain pump and found a child socket inside inlet of pump. Clear sock and run a test drain and is now functioning properly.

Install two new door hinges do to broken springs and door is now functioning properly.

Replace faulty sump assembly and clear fault codes and run test cycle and verify unit is now functioning properly.; used 1 W11025157 (Sump) from stock