Installed new ignitor with wire for the rear right burner. Lighting better but still arcing to the head instead of up to the cap. Will send customer some new burner caps and new burner for the rear right. Customer can put on new caps and head and see if that alleviates the issue.; ordrng 1 W11605759 (Cap kit) and 1 W11435659 (Burner head)

Installed lock ran calibration auto test and leveled leg all test ok

Bad lid lock ; ordrng 1 W11307244 (Lock)

"Customer reports that dryer is tripping the circuit breaker. They had an electrician replace the breaker but it is still tripping. It has tripped the breaker 3 times total and it is very random. It also trips the breaker when the dryer is not even being used, which suggests an issue with the electrical circuit/system. Tech checked the dryer over but could not find an issues or anything that would cause the circuit breaker to trip. Ran the dryer for about 15 minutes and it did not trip the breaker."

Installed new right door on the unit. New door looks good. Used heat gun to flatten out gasket. Also leveled unit to keep drawer from rolling out.