Installed new control. Tested unit got code f6e4 for float switch open checked float switch and switch is good. Unit did not fill with water just started cycle Hit cancel to drain unit and pump would not turn on. Drain pump took out fuse on new board. Will need another control and drain pump. Office order parts rescheduled for wed 3/31 ; ordrng 1 W11225084 (Control. Main) and 1 WPW10348269 (Drain pump)

Unit is getting 120 at power source and 120 into board but control is not sending power to rest of unit. Office order main control rescheduled for tue 3/23. ; ordrng 1 W11225084 (Control elec)

DISHWASHER KITCHEN-AID KDFE104DWH3 "Replaced sump, control, and ui. Ran full diagnostics cycle all test good no leaks."

REFRIGERATOR WHIRLPOOL WRX986SIHZ00 "Installed new fresh food evap, recharged to factory specs. Pressures and operations check ok at this time. Advised customer to monitor, allow 24 hours for temps to return to normal. 48 hours for ice bin to fill."

REFRIGERATOR WHIRLPOOL WRX986SIHZ00 "Wrong evap ordered, ordering correct evaporator, shipping part to tech to double check before returning. Rescheduled for 9/10 install. Part to tech. ; ordrng 1 PARTTOTECH and 1 W11116006 (evaporator)"