Replaced hinges. Tested operation all test good while out. Tight fit with installation. Finding when installed has same issues. There is a slight that sits higher on front cabinet wood that could be causing microwave to be only supported in front. When outside of cabinet or not pushed in fully all test good. Let them know would want to fix install issues.

"Ms pic tag is not legible. it has been cleaned many times and think is worn off. The customer had been cleaning the control, getting it moist, before it stopped working. ..power cycled unit and out it into diagnostics. It is working in bake and broil cycles. Advised to keep moisture away from direct contact with the touch pad.Collected $139.00 on check auth code LNW39Y"

Heated and straightened gasket on refrigerator door

"Removed and replaced control board on washer , after replacing, found F7E4 code, then found wires pulled out of plug on shifter, replaced plug on harness, tested good"

"Removed and replaced water valve on Maytag washer pointed out that hot water shut off valve not working properly and needs to be replaced, tested good, no leaks"