"No errors stored in machine upon arrival, unit had just ran through a cycle with no issues detected. Ran unit in a test mode, no leaks observed during testing. Heard a loud electrical buzzing sound from the inner door panel during start of test cycle both times I ran it. Unit did not drain properly on the second drain but drain is working as designed. Drain tube connected to air gap air gap connected to large rubber hose that goes into disposal. Sump assembly no on site today when arrived will need to reschedule when delivered.; schdld next appmnt for 4/2 TUE !"

Installed new interlocks. All checks good.

"Was low on fuses. Replaced the magnetron and transformer. It ran longer now but still blew the fuse. The control board relay was open after it stopped working, so the board relay was affected by the previous instantaneous fuses going bad. Additionally needs the W11544456 microcomputer that is at DVH.The customer will check availability of schedules to see who is available for rescheduling. She will call the office next week to reschedule.; ordrng 1 W11544456 (Microcomputer), used 1 M0805101 (Fuse) from stock"

"Replaced the motor sump assembly and it tests good, showed the customer how to remove the filter and clean it. Tests good with no leaks."

"Replaced harness from dsi to ignitor unit ignited for me with back off when putting it back in and trying again unit did not reignite. Bake still works, called techline. Sr7738776869. Want to do valve and ignitor at same time.; ordrng 1 W11449506 (Regulator) and 1 WPW10333842 (Igniter)"